The Magic of Ski Wax

Ski wax is not just about improving performance, it goes beyond that. It's about connecting you with the mountain in a deeper and more meaningful way. As you glide down the slopes, the wax helps you to feel more connected to the snow and the terrain. It allows you to feel every turn, every bump, and every change in the snow conditions. Ski wax is like a conductor, helping you to dance with the mountain and feel its rhythm.

It's not just a wax; it's an invitation to make every run memorable.

  • How to Apply - Paraffin

    __________________

    Tip! for best result, use our Incredible Base Cleaner to prepare your ski before you start adding you paraffin

    __________________

    1. Figure out your base-structure
    2. Apply desired paraffin
    3. Remove surplus paraffin with a scraper
    4. Rinse the base with a fiber-/horsehair rotor brush
    5. Expose the structure using a fine steel (bristle D 0,08) 3-4 strokes (hand brush)
    6. Polish with a nylon rotor brush

  • How to Apply - Powder

    __________________

    Tip! To create a better foundation for the Power to adhere towards. Add a layer of our Diamond block

    _________________

    1. Apply desired powder
    2. Remove surplus powder with a scraper
    3. Rinse the base with a fiber-/horsehair rotor brush
    4. Expose the structure using a fine steel(bristle D 0,08) 3-4 strokes(hand brush)
    5. Polish with a nylon rotor brush

  • How to Apply - Liquid

    __________________

    Tip! Make sure you shake the bottle a few seconds befor usage

    → Do not store the bottle under 5°C

    _________________

    1. Apply a thin layer of the desired Liquid on the base of your ski by using the primer sponge on the top of the bottle
    2. Let it dry until the solvent has vaporized (about 2-4min depending if you are inside or outside)
    3. Polish the base thoroughly by using a nylon brush
      DONE!

  • How to Apply - Kick Ass Base Cleaner

    __________________

    Tip! Be generous, you will not dry out the base by using Kick Ass Base Cleaner often. A new shortcut to get back to zero!

    _________________
    1. Distribute a descent amount of Kick Ass Cleaner over your base
    2. Evenly distribute Kick Ass Base Cleaner by using a cloth
    3. Let it dry a couple of 3-5min
    4. Use a fine steel(bristle D 0,08) 4-6 strokes(hand brush)
    5. Done! You are back to base zero

Downloads

View all